100V Series Air-Cooled Gas
125V Air-Cooled Gasoline

125V Air-Cooled Gasoline

Combining powerful performance with a compact design ideal for tight quarters mowing, the Model 125V is a great way to step up to Grasshopper comfort, quality and durability.

KOHLER CONFIDANT ENGINE
Professional-grade 747 cc Kohler Confidant OHV V-Twin engine Designed to maximize airflow and reduce operating temperatures for extended service life Heavy-duty cyclonic air filter with Quad-Clean™ multi-stage air filtration Full-pressure lubrication to protect critical components
DESIGN-MATCHED TRANSMISSION
Design-matched, fully hydraulic Parker HT Series integrated pump-and-wheel-motor transmissions with in-line cooling fans and fine-particle filtration No power-robbing gearbox or other wear parts for longer service life Provides best-in-class transmission fluid change interval with no break-in period, reducing costs and maintenance time
HEAVY-DUTY DECK
Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge Specially designed cutting chambers enhance airflow for better cut quality Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion
QUIKAJUST® DROP PIN HEIGHT ADJUSTMENT
Raise and lower the deck easily with foot pedal and drop pin for precision cutting heights between 1.0 and 5.0 inches.
WARRANTY
Commercial Use: 2-year or 500-hour (whichever comes first); limited warranty covering parts and labor. Residential Use: 4-year or 500-hour (whichever comes first); limited warranty covering parts and labor.
RUGGED CONSTRUCTION
Robotically-welded steel construction for long-lasting durability Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance
REDUCED MAINTENANCE
Only two Access-Eze™ lubrication points cut maintenance time up to 95% Self-tensioning belts minimize cost and labor on routine maintenance
ULTIMATE OPERATOR STATION®
ComfortZone™ seat eliminates jostles and jolts with coil-spring suspension and a fully padded, high-back seat, padded armrests and variable density foam cushion. Iso-mounting smooths the ride, erases fatigue and keeps the operator comfortably in control at faster mowing speeds
ULTIMATE OPERATOR STATION®
Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach
ULTIMATE OPERATOR STATION®
One- or two-handed operation with ComfortReach™ adjustable Hydra-Smooth™ dual levers that automatically return to neutral from either forward or reverse position.
SHOCK IMPACT REDUCTION SYSTEM™ (SIRS™)
Unrivaled comfort with iso-mounted Ultimate Suspension Ride™ scuff-resistant, Cordura®-covered, deep-cushioned, high-back seat with padded lumbar support and armrests Roomy, iso-mounted, shock-absorbing footrest
VIGILANT OPERATOR PRESENCE SYSTEM™
Standard, low profile operator protection structure (OPS) with an adjustable seatbelt Dampened steering levers that return to neutral from forward and reverse Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position
4X REAR DISCHARGE DECK
Dedicated 48-inch and larger rear discharge decks throw clippings out back for a smooth cut and no windrowing
WIDE SEAT CONVERSION KIT
Provides additional seating room for larger operators or to accommodate cell phones or pagers. Requires seat belt extension.
QUIKAJUST TILT™ LEVERS
Available for all MidMount models, optional QuikAjust Tilt™ steering levers (except 124V-41) with "no tools" adjustment provide a 9-inch range for maximum comfort and fit while maintaining natural arm and wrist positions.
SIDE DISCHARGE CONTROL KIT
Control the discharge of the mower deck to avoid putting clippings in flower beds and on sidewalks
DURAFLEX® SUSPENSION FORKS
Optional DuraFlex™ Suspension Forks absorb the impacts of rough terrain to maintain a level cut, and can be set for use with PowerVac™ collectors.
SUNSHADE CANOPY VINYL
Lightweight, water repellent, UV-resistant vinyl canopy mounts easily to OPS or ROPS to limit exposure to direct sunlight, reducing eye strain and increasing operator comfort.
LED WORK LIGHTS
LED work lights provide improved visibility in low light situations.
FOOT PEDAL EXTENSION KIT
Extends foot pedals to allow easy height control for shorter operators.
YELLOW BEACON LIGHT
Yellow beacon attaches to OPS or ROPS to provide greater visibility in high-traffic areas.
DOWN DISCHARGE™ MULCHING PACKAGE
The optional Down Discharge™ mulching package with GrassMax™ medium-lift blades cuts and recuts clippings and directs them deep into the grass bed, enriching turf and producing a beautifully manicured cut.
SPEEDTRIMMING™ ROLLER KIT
The optional SpeedTrimming™ heavy-duty, anti-scalp roller kit for 61-inch and larger DuraMax® decks speeds close trimming near buildings, fences retaining walls and other landscaping features. Kits available for both left and right sides of cutting decks.
TRIMAIDE™ VERTICAL ROLLER KIT
Available for the left-hand corner of 52-inch DuraMax® decks speeds close trimming near buildings, fences retaining walls and other landscaping features.
POWERVAC® MIDMOUNT COLLECTION SYSTEM
PowerVac™ Collection Systems deliver a clean sweep on every pass. Simply adjust your mowing speed to your conditions. Quik-D-Tatch® Vac drive can be removed in seconds without tools
CUSTOM CORDURA® WEATHER COVER
Weather-resistant, black Cordura fabric cover with embroidered Grasshopper logo keeps seat and engine area protected during storage or between mowings. Slips over ROPS, with Velcro closure to secure the opening.

Engine

48" 125V52" 125V61" 125V
Engine TypeKohler Confidant, V-TwinKohler Confidant, V-TwinKohler Confidant, V-Twin
Displacement45.6 cu. in. (747 cc)45.6 cu. in. (747 cc)45.6 cu. in. (747 cc)
LubricationPressure Lube/FilterPressure Lube/FilterPressure Lube/Filter
CrankshaftVerticalVerticalVertical
Engine CoolingAirAirAir
Fuel TypeGasoline - unleadedGasoline - unleadedGasoline - unleaded
Fuel Capacity6.5 U.S. Gal. (24.6 l)6.5 U.S. Gal. (24.6 l)6.5 U.S. Gal. (24.6 l)
Optional Fuel CapacityNANANA
Air CleanerHeavy-duty cyclonic air filter with QUAD-CLEAN™ multi-stage air filtrationHeavy-duty cyclonic air filter with QUAD-CLEAN™ multi-stage air filtrationHeavy-duty cyclonic air filter with QUAD-CLEAN™ multi-stage air filtration
MufflerUltra quiet, single, industrial type.Ultra quiet, single, industrial type.Ultra quiet, single, industrial type.

DuraMax Decks

48" 125V52" 125V61" 125V
DuraMax® DeckNANANA
Mulch Kit #504551504567504569
Deck Size48"52"61"
Cutting Height Range1.0 to 5.0 in. (2.5 to 12.7 cm)1.0 to 5.0 in. (2.5 to 12.7 cm)1.0 to 5.0 in. (2.5 to 12.7 cm)
Deck ConstructionDouble-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts. Anvil-edge design with 0.5 in, (12.7 mm) reinforcement on front edge of deck.Double-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts. Anvil-edge design with 0.5 in, (12.7 mm) reinforcement on front edge of deck.Double-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts. Anvil-edge design with 0.5 in, (12.7 mm) reinforcement on front edge of deck.
Deck Blades(2) 18 in. (45.7 cm)
(1) 15 in. (38.1 cm)
(3) 18 in. (45.7 cm)(3) 21 in. (53.3 cm)
Deck SpindlesSentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Spindle Housing8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade DriveBelt drive with single Kevlar V-belt and idler arm tensioning.Belt drive with single Kevlar V-belt and idler arm tensioning.Belt drive with single Kevlar V-belt and idler arm tensioning.
Deck TrimabilityNANANA

Starter & Electrical System

48" 125V52" 125V61" 125V
Battery12 Volt12 Volt12 Volt
StarterSolenoid shiftSolenoid shiftSolenoid shift
IgnitionBreakerlessBreakerlessBreakerless
Interlock SystemPrevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.

Ultimate Operator Station

48" 125V52" 125V61" 125V
Operator SeatUltimate Suspension Ride (USR) deep-cushioned, high-back, foam-padded, scuff-resistant CoolTemp Cordura®-covered with padded lumbar support and armrests.Ultimate Suspension Ride (USR) deep-cushioned, high-back, foam-padded, scuff-resistant CoolTemp Cordura®-covered with padded lumbar support and armrests.Ultimate Suspension Ride (USR) deep-cushioned, high-back, foam-padded, scuff-resistant CoolTemp Cordura®-covered with padded lumbar support and armrests.
SuspensionRoomy, iso-mounted footrest with Shock Impact Reduction System™ (SIRS™).Roomy, iso-mounted footrest with Shock Impact Reduction System™ (SIRS™).Roomy, iso-mounted footrest with Shock Impact Reduction System™ (SIRS™).
Console-mounted InstrumentsDigital hour meter, parking brake indicator light, ignition switch, choke and push/pull PTO switch.Digital hour meter, parking brake indicator light, ignition switch, choke and push/pull PTO switch.Digital hour meter, parking brake indicator light, ignition switch, choke and push/pull PTO switch.
Work LightsOptional - LEDOptional - LEDOptional - LED
Hour MeterStandardStandardStandard

Transmission & Steering

48" 125V52" 125V61" 125V
Transmission TypeDesign-matched hydrostatic system with in-line cooling fans. Fully hydraulic, integrated Parker HT Series transmission with variable displacement piston-type pumps and high-torque wheel motors for each drive wheel.Design-matched hydrostatic system with in-line cooling fans. Fully hydraulic, integrated Parker HT Series transmission with variable displacement piston-type pumps and high-torque wheel motors for each drive wheel.Design-matched hydrostatic system with in-line cooling fans. Fully hydraulic, integrated Parker HT Series transmission with variable displacement piston-type pumps and high-torque wheel motors for each drive wheel.
Transmission FiltrationInternal field-serviceable filter / No break-in oil change required; best-in-class service intervals with CoolTemp Hydro-Max™ fluid.Internal field-serviceable filter / No break-in oil change required; best-in-class service intervals with CoolTemp Hydro-Max™ fluid.Internal field-serviceable filter / No break-in oil change required; best-in-class service intervals with CoolTemp Hydro-Max™ fluid.
Speeds0 - 8.0 mph (0 - 12.9 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse0 - 8.0 mph (0 - 12.9 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse0 - 8.0 mph (0 - 12.9 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
Turning RadiusTrue zero degree, turns within own length with counter-rotating, independently powered drive wheels.True zero degree, turns within own length with counter-rotating, independently powered drive wheels.True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
SteeringOne- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.
BrakesDynamic braking through hydrostatic transmission.Dynamic braking through hydrostatic transmission.Dynamic braking through hydrostatic transmission.
Parking BrakeCompressionCompressionCompression
Attachment DriveNANANA

Tire Sizes

48" 125V52" 125V61" 125V
Standard Midmount Drivetire20x10x10 turf, 4-ply rated20x10x10 turf, 4-ply rated20x12.00x10
Optional MidMount™Drive TiresNANANA
MidMount™ Front Caster Wheels13x6.50x6; pneumatic with greasable, double-sealed bearings to protect from grass wrap.13x6.50x6; pneumatic with greasable, double-sealed bearings to protect from grass wrap.13x6.50x6; pneumatic with greasable, double-sealed bearings to protect from grass wrap.
Standard FrontMount™ Drive TireNANANA
Optional FrontMount™ Drive TireNANANA
FrontMount™ Single Frok Tail Wheel SizeNANANA
FrontMount™ Wide Stance Single Fork Tail Wheel SizeNANANA
FrontMount Deck Tire

Dimensions

48" 125V52" 125V61" 125V
Height, Seatback47.0 in. (119.4 cm)47.0 in. (119.4 cm)47.0 in. (119.4 cm)
Height Seat Cushion29.0 in. (73.7 cm)29.0 in. (73.7 cm)29.0 in. (73.7 cm)
Height ROPS59.0 in. (149.9 cm)59.0 in. (149.9 cm)59.0 in. (149.9 cm)
Mower+Deck Length75.0 in. (190.5 cm)75.0 in. (190.5 cm)78.0 in. (198.1 cm
Mower+Deck - Deck Folded
Deck Width - Side Discharge61.5 in. (156.2 cm)65.5 in. (166.5 cm)74.5 in. (189.2 cm)
Deck Width - Side Discharge 41"NANANA
Deck Width - Side Discharge 42"NANANA
Deck Width - Side Discharge 48"61.5 in. (156.2 cm)61.5 in. (156.2 cm)61.5 in. (156.2 cm)
Deck Width - Side Discharge 52"65.5 in. (166.5 cm)65.5 in. (166.5 cm)65.5 in. (166.5 cm)
Deck Width - Side Discharge 61"74.5 in. (189.2 cm)74.5 in. (189.2 cm)74.5 in. (189.2 cm)
Deck Width - Side Discharge 72"NANANA
Deck Width - Mulching49.5 in.* (125.7 cm)53.5 in.* (135.9 cm)62.5 in.* (158.8 cm)
FrontMount™ WidthNANANA
FrontMount™ WheelbaseNANANA

Weight

48" 125V52" 125V61" 125V
Weight Power Unit+Deck (uncrated)810 lbs. (367.5 kg)830 lbs.(376.5 kg)880 lbs.(399.2 kg)
Weight FrontMount™ Power Unit onlyNANANA
Weight Mower Deck
Weight Mulch Kit25 lbs. (11.3 kg)29 lbs. (13.2 kg)36 lbs. (16.3 kg)
REQUEST A QUOTEREQUEST A DEMO
Email
First Name
Last Name
Phone
Postal Code
Best time to contact
Select a variant
Email
First Name
Last Name
Phone
Postal Code
Best time to contact
Select a variant